REVISTA MINERÍA 540 | EDICIÓN SEPTIEMBRE 2022

MINERÍA la mejor puerta de acceso al sector minero MINERÍA / SEPTIEMBRE 2022 / EDICIÓN 540 114 del depósito de desmonte para elevar su cota aproximadamente entre 15 y 20 metros. El enfoque general para estabilizar la ampliación vertical implica el diseño y la construcción de un talud de suelo reforzado delante del contrafuerte existente. La elevación del depósito de desmonte Pampa Verde permitirá una capacidad de almacenamiento adicional de 0.94 millones de metros cúbicos, en comparación con su configuración inicial. Caracterización de la zona Geología local A nivel local, en la zona del proyecto La Zanja existen principalmente rocas volcánicas piroclásticas y derrames de las formaciones Lama del Terciario inferior y rocas volcánicas de la Formación Porculla del Terciario medio. Las rocas de la Formación Huambo del Terciario superior aparecen al noroeste, fuera de los límites del área del proyecto. Investigación geotécnica Antecedentes La primera investigación geotécnica se realizó entre el 16 de agosto y el 11 de octubre de 2010, con el fin de determinar las características geotécnicas de las superficies de cimentación donde se construiría el depósito de desmonte Pampa Verde y las estructuras asociadas. Los trabajos de campo consistieron en seis sondajes, 46 calicatas, pruebas con penetrómetro dinámico de punta cónica (DPL) y cartografía geológica-geotécnica. La segunda investigación geotécnica se llevó a cabo en junio de 2013 y consistió en seis sondajes, nueve calicatas y cuatro pruebas de densidad in situ que se llevaron a cabo por el método de sustitución de agua. La tercera investigación geotécnica se realizó entre el 5 y el 25 de junio de 2014 para caracterizar los materiales que estaban almacenados en el depósito de desmonte. Se han realizado dos sondeos, 12 calicatas (muestreo para pruebas de granulometría a gran escala) y ocho pruebas de densidad in situ por el método de sustitución de agua en los materiales argílicos y arcillosos avanzados. En noviembre de 2014 se llevó a cabo una investigación geotécnica adicional para caracterizar los materiales arcillosos y avanzados que se habían conformado. Se realizaron dos calicatas, dos pruebas de granulometría a gran escala y siete pruebas de densidad in situ por el método de sustitución de agua. Entre abril y junio de 2017 se desarrolló una investigación geotécnica con el objetivo específico de diseñar la elevación del depósito de desmonte, habiendo caracterizado los materiales almacenados y la cimentación en el lugar del talud de suelo reforzado proyectado. Trabajos de campo La investigación geotécnica de campo consistió en la investigation. As a result of the redesign of the Pampa Verde waste dump, Knight Piésold developed a loading plan to conform the four types of the materials identified. To increase the storage capacity, Minera La Zanja requested the design of a vertical expansion of the dump to raise its elevation approximately 15 to 20 meters. The overall approach to stabilizing the vertical expansion involves the design and construction of a reinforced soil slope in front of the existing reinforced buttress. The raising of the Pampa Verde waste dump will allow an additional storage capacity of 0.94 million cubic meters, compared to its initial configuration. Characterization of the Area Local Geology At the local level, in the La Zanja project area there are mainly pyroclastic volcanic rocks and spills of the Lower Tertiary Lama formations and volcanic rocks from the Middle Tertiary Porculla formation. The rocks of the Upper Tertiary Huambo formation appear to the northwest, outside the limits of the project area. Geotechnical Investigation Background The first geotechnical investigation was carried out between August 16 and October 11, 2010, in order to determine the geotechnical characteristics of the foundation surfaces where the Pampa Verde waste dump and associated structures would be built. The field works consisted of 6 drilling holes, 46 test pits, tests with dynamic penetrometer of conical tip (DPL) and geological-geotechnical mapping. The second geotechnical investigation was carried out in June 2013 and consisted of 6 drilling holes, 9 test pits and 4 in-situ density tests that were carried out by the water replacement method. The third geotechnical investigation was carried out between June 5 and 25, 2014, to characterize the materials that were stored in the dump. 2 drilling holes, 12 test pits (sampling for large-scale grainsize tests) and 8 in-situ density tests by the water replacement method were performed on the advanced argillic and argillic materials. Additional geotechnical investigation was conducted in November 2014 to characterize the advanced argillic and argillic materials that had been conformed. 2 test pits, 2 large scale grainsize tests and 7 in-situ density tests were developed by the water replacement method. Between April and June 2017, a geotechnical investigation was carried out with the specific objective of designing the raising of the Pampa Verde waste dump, having characterized the stored materials and the foundation at the site of the projected reinforced soil slope.

RkJQdWJsaXNoZXIy MTM0Mzk2