REVISTA MINERÍA 552 | EDICIÓN SEPTIEMBRE 2023

MINERÍA la mejor puerta de acceso al sector minero MINERÍA / SEPTIEMBRE 2023 / EDICIÓN 552 34 Flotación de partículas gruesas de sulfuros de cobre Flotation of Coarse Particles of Copper Sulphides Procesamiento de Minerales Por: Jorge Ganoza, metalurgista. By: Jorge Ganoza, Metallurgist. Introducción Es bien sabido que el comportamiento del tamaño de partícula en la fase de espuma es importante para determinar el rendimiento de un circuito. La constante de velocidad de flotación está influenciada por la probabilidad de que una partícula gruesa o fina sobreviva a la acción de limpieza de la zona de espuma y se reporte al producto de espuma[1]. En general, se acepta que una espuma de buena estabilidad es importante para lograr una buena ley y una alta recuperación de sulfuros de cobre porque muchas operaciones intentan aumentar el tonelaje, pero la estabilidad de la operación no se evalúa adecuadamente cuando el tamaño de alimentación es más grueso que el diseño. En la presente investigación, se llevó a cabo un programa de pruebas de flotación para proporcionar una mejor comprensión del comportamiento de las partículas gruesas de sulfuros de cobre en la flotación de primaria (rougher) y limpieza. Los parámetros examinados incluyeron el efecto del tamaño de partícula en el rendimiento Introduction It’s well known that the behavior of the particle size in the froth phase is important in determining flotation performance. The flotation rate constant is influenced by the probability that a coarse or fine particle survives the cleaning action of the froth zone and reports to the froth product[1]. It is generally accepted that a froth of good stability is important for the achievement of good grade and high recovery of copper sulphides because many operations try to increase the tonnage, but the stability of the operation is not evaluated properly when the feed size is coarser than the design. In the present investigation, a flotation testing program was conducted to provide a better understanding of the behavior of the coarse particles of copper sulphides in rougher and cleaning flotation. Parameters examined included the effect of the particle size on rougher flotation performance, the recovery of copper and gold, and the level of regrinding a coarse rougher copper

RkJQdWJsaXNoZXIy MTM0Mzk2