MINERÍA la mejor puerta de acceso al sector minero EDICIÓN 580 / ENERO 2026 32 Improvement in cell removal (fluffing). Reduction of lift height (from 8 to 6 meters). Intensification of metallurgical testing (particle size analysis, compaction–permeability tests, column leaching). Strict control of fines content (below 22%). Physicochemical Optimization: Mineralogical characterization of the fines, identifying the predominance of illite and the presence of kaolinite and pyrophyllite in the fine fraction. Optimization of Wetting and Irrigation: Reduction of the surface tension of the cyanide solution to minimize channeling and ensure uniform wetting of the heap. This combination of strategies led to substantial improvements: Increase in gold recovery of 3% at laboratory scale and 10% at semi-industrial scale (180,000-ton cells). Increase in leaching kinetics (50% reduction in leaching cycle time). Drastic reduction in ponding (200% increase in permeability in pure fine materials). Based on the results and mineralogical characterization, the use of non-ionic surfactants is recommended for leaching ores with mineralogical characteristics similar to those of Shahuindo, particularly in the fine fraction (micas), where deficiencies in heap wetting and dissolved gold transport are most pronounced. However, the selected surfactant must be carefully evaluated to ensure that it does not generate foam, is consumed within the ore matrix, and does not produce organic byproducts that could cause operational issues. compactación-permeabilidad y lixiviación en columnas). Control riguroso del porcentaje de finos (menor a 22%). Optimización fisicoquímica: Se caracterizó mineralógicamente a los finos, identificando la predominancia de illita y la presencia de caolinita y pirofilita en la fracción fina. Optimización de humectación y riego: mediante la reducción de la tensión superficial de la solución cianurada para minimizar canalizaciones y asegurar una humectación uniforme del lecho. Esta combinación de estrategias resultó en mejoras sustanciales: Incremento de recuperación de oro de 3% a escala laboratorio y un 10% a semi industrial (celdas de 180 mil toneladas). Aumento de la cinética de lixiviación (reducción del 50% al ciclo de lixiviación). Reducción drástica de encharcamientos (incremento de la permeabilidad en materiales finos puros del 200%). De los resultados y caracterización de minerales, se recomienda la utilización de tensoactivos no iónicos para lixiviación de minerales que Figura 1. Alto contenido de finos.
RkJQdWJsaXNoZXIy MTM0Mzk2